|
Wir über uns
|
Veranstaltungen
|
Aus- & Fortbildung
|
Mitgliederservice
|
Innovation Award
Laser Technology
|
Innovation Award
2010
|
Innovation Award
2008
|
Innovationspreise
2000 - 2006
|
Nachwuchs-
Förderpreis
|
Publikationen
|
|
|
|
|
|
| |
Fachartikel
2009
2008
2007
2006
2005
2004
2003
2002
2001
2007
R. Schmitt, B.E. Damm, L. Juschkin
Mit weicher Röntgenstrahlung hochgenau messen
In: Optische Messung technischer Oberflächen in der Praxis
Düsseldorf: VDI-Verl.
VDI-Berichte 1996
329-337, 2007
S. Kaierle, W. Fiedler, B. Regaard, M. Dahmen
Anwendung brillianter Diodenlaser beim Schweißen von Aluminium-Dünnblechen
Laser Technik Journal
2, 35-38, 2007
S.Kaierle, M. Dahmen, S. Mann, R. Poprawe
Autonomous Production Cell for Laser Beam Welding
Proc. Int. Conf. on Competitive Manufacturing "COMA 07", Stellenbosch, Südafrika
6 S., 2007
R. Noll, M. Krauhausen
Autoteile unter Laseraugen
Laser + Photonik
2, 30-33, 2007
Download (PDF/1,25 MB)
Johnigk, C.
Berührungslos - präzise - steuerbar
MO Metalloberfläche
61, 24-27, 2007
J. Geiger, B. Erben, D. Hoffmann, S. Altmeyer
Characterization of high power multimode combiners
CLEO Europe 2007, Munich, Germany, June 18-21
1 S., 2007
C. Franz, S. Mann, S. Kaierle
Comparison of process monitoring strategies for laser transmission welding of plastics
Proc. of ICALEO 2007, Orlando, Fl.
602-606, 2007
M. Dahmen, W. Fiedler, B. Regaard, S. Kaierle
Continuous process control during laser beam welding of small section Aluminium sheet
Proc. of WLT Conf. Lasers in Manufacturing, Munich
5 S., 2007
R. Noll, M. Krauhausen
Den Bewegungszustand des Blechs einfrieren
QZ Qualität und Zuverlässigkeit
52, 36-40, 2007
B. Jungbluth, M. Vierkoetter, M. Hoefer, J. Loehring, D. Oberbeckmann, D. Hoffmann
Design and characterization of a rugged and compact setup for widely tunable harmonic generation in the ultraviolet
Proc. SPIE
6455, 1-10, 2007
J. Loehring, K. Nicklaus, N. Kujath, D. Hoffmann
Diode pumped Nd:YGG laser for direct generation of pulsed 935 nm radiation for water vapour measurements
Proc. SPIE
6451, in print, 2007
B. Zintzen, A. Emmerich, J. Geiger, D. Hoffmann, P. Loosen
Effective cooling for high-power fiber lasers
Proc. of the 4th Int. WLT-Conf. on Lasers in Manufacturing , Munich, June 2007
5 S., 2007
B. Regaard, W. Fiedler, S. Kaierle
Error detection in lap welding applications using on-line melt pool contour analysis by coaxial process monitoring with external illumination
Proc. of WLT Conf. Lasers in Manufacturing, Munich
5 S., 2007
M. Haverkamp, K. Wieching, M. Traub, K. Boucke
Fiber-coupled diode laser modules with wavelengths around 2 µm
Proc. SPIE
6456, 9 S., 2007
C. Wessling, M. Traub, D. Hoffmann
Fiber coupled diode laser of high spectral and spatial beam quality with kW class output power
Proc. SPIE
6456, 1-7, 2007
I. Miyamoto, A. Horn, J. Gottmann, D. Wortmann, F. Yoshino
Fusion Welding of Glass Using Femtosecond Laser Pulses with High-repetition Rates
J. Laser Micro/Nanoeng.
2, 57-63, 2007
B. Zintzen, T. Langer, J. Geiger, D. Hoffmann, P. Loosen
Heat transport in solid and air-clad fibers for high-power fiber lasers
Opt. Expr.
15, 16787-16793, 2007
E. W. Kreutz, K. Walther, R. Poprawe, S. Angel, E. Ratte, W. Bleck, K. Bobzin, E. Lugscheider, R. Nickel, K. Richardt, N. Bagcivan
High-temperature turbine applications using open porous metallic foams with thermal barrier coatings and cooling hole arrays
ISCORMA-4, Calgary/Alberta, Canada
27-31 August 2007
11 S., 2007
K. Walther, M. Brajdic, I. Kelbassa
Increase of drilling velocity by use of superposed laser radiation
Proceedings of 4th International WLT-Conference on Lasers in Manufacturing, Munich, June 2007
4 S., 2007
H. Schinkel, P. Jacobs, S. Schillberg, M. Wehner
Infrared picosecond laser for perforation of single plant cells
Biotechnol. Bioeng.
99, 244-248, 2007
D. Petring
Integriertes Laserstrahlschneiden und -schweißen: Reduzierung von Nebenzeiten und Systemaufwand
EALA 2007, Bad Nauheim
15 S., 2007
P. Albus, B. Burbaum, I. Kelbassa
Laser cladding of mesh structures on HPT liner and NGV parts
Proc. of 4th Int. WLT-Conf. on Lasers in Manufacturing 2007, Munich, June
3 S., 2007
J. Gottmann, L. Moiseev, D. Wortmann, I. Vasilief, L. Starovoytova, D. Ganser, R. Wagner
Laser deposition and laser structuring of laser active planar waveguides of Er:ZBLAN, Nd:YAG and Nd:GGG for integrated waveguide lasers
Proc. SPIE
6459, 10 S., 2007
M. Wehner, P. Jacobs, D. Esser, H. Schinkel, S. Schillberg
Laser-mediated perforation of plant cells
Proc. SPIE
6632, 9 S., 2007
M. Wehner, T. Mans, W. Meiners, A. Lenenbach, C. Wessling, R. Poprawe
Lasertechnik für die Zahnmedizin
Laserzahnheilkunde
3, 191-198, 2007
R. Noll
Lasertriangulation
In: Handbuch zur Industriellen Bildverarbeitung. Hrsg.: N. Bauer. Fraunhofer IRB Verl.
56-60, 2007
R. Noll, M. Krauhausen
Lasertriangulation für die Online-Messung geometrischer Größen in der Produktion
In: Handbuch zur Industriellen Bildverarbeitung. Hrsg.: N. Bauer. Fraunhofer IRB Verl.
260-275, 2007
I. Miyamoto, A. Horn, J. Gottmann
Local Melting of Glass Material and Its Application to Direct Fusion Welding by Ps-laser Pulses
J. Lasermicro/Nanoeng.
2, 7-14, 2007
J. Gottmann, D. Wortmann, I. Vasilief, L. Moiseev, D. Ganser
Manufacturing of Nd:Gd3Ga5O12 ridge waveguide lasers by pulsed laser deposition and ultrafast laser micromachining
Appl. Surf. Sci.
254, 1105-1110, 2007
L. Peter, R. Noll
Material ablation and plasma state for single and collinear double pulses interacting with iron samples at ambient gas pressures below 1 bar
Appl. Phys. B
86, 159-167, 2007
T. Jambor, K. Wissenbach
Micro laser cladding with high quality fibre lasers
Proc. 4th Int. WLT-Conf. on Lasers in Manufacturing, Munich, Germany, June 2007
193-197, 2007
M. Hoefer, M. Traub, R. Kleindienst, H. Sipma, H.-D. Hoffmann, P. Wessels, P. Burdack
Multi ten-watt, ultra-stable, and tuneable Innoslab-based single frequency MOPA
Proc. SPIE
6451, 7 S., 2007
D. Petring, H. Dickler
Multifunktionaler Laserbearbeitungskopf
MM Maschinenmarkt
22, 34-36, 2007
D. Petring, H. Dickler
Nebenzeiten senken und Flexibilität steigern
Technica
56, Nr 06/07, 72-74, 2007
P. Albus, A. Boglea, B. Burbaum, J. Holtkamp, I. Kelbassa, V. Nazery-Goneghany, A. Olowinsky, D. Petring, M. Poggel, F. Schmitt, F. Schneider, N. Wolf, R. Poprawe
Neue Schweißtechnologien mit neuen Lasern
Proc. of 10th International Aachen Welding Conference iASTK´07
229-242, 2007
M. Leers, C. Scholz, K. Boucke, M. Oudart
Next generation heat sinks for high-power diode laser bars
Semiconductor Thermal Measurement and Management Symposium, 2007
SEMI-THERM 2007. 23. Annual IEEE
105-111 (2007)
M. Leers, K. Boucke, C. Scholz, T. Westphalen
Next generation of cooling approaches for diode laser bars
Proc. SPIE
6456, 10 S., 2007
M. Traub, M. Bock, H.-D. Hoffmann, M. Bartram
Novel high peak current pulsed diode laser sources for direct material processing
Proc. SPIE
6456, in print, 2007
V. Sturm, A. Brysch, R. Noll
Online Multielement Analysis of the Top Gas of a Blast Furnace by Laser-induced Breakdown Spectroscopy (LIBS)
Berg- und Hüttenmännische Monatsh.
1, 28-32, 2007
R. Noll, M. Krauhausen
Online-Lasermesstechnik für Walzprodukte
stahl und eisen
127, 99-105, 2007
Download (PDF/0,9 MB)
S. Angel, E. Ratte, W. Bleck, K. Bobzin, E. Lugscheider, R. Nickel, K. Richardt, N. Bagcivan, N., K. Walther, E.W. Kreutz, I. Kelbassa, R. Poprawe
Open porous metallic foams with thermal barrier coating and cooling hole array for high temperature turbine applications
High Temp. Mat. Proc.
11, 321-344, 2007
V. Sturm
Optical micro-lens array for laser plasma generation in spectrochemical analysis
J. Anal. Atom. Spectr.
22, 1495-1500, 2007
E. Willenborg
Polieren mit Laserstrahlung
Kunststoffe
97 , 63-66, 2007
I. Kelbassa, K. Walther, L. Trippe, W. Meiners, C. Over
Potentials of manufacture and repair of nickel base turbine components used in aero engines and power plants by laser metal deposition and laser drilling
J. Aerospace Power
22, 739-748, 2007
W. Fiedler, M. Dahmen, S. Kaierle
Process control of laser beam welded small section aluminum sheets
Proc. of ICALEO 2007, Orlando, Fl.
271-276, 2007
E.W. Kreutz, L. Trippe, K. Walther, R. Poprawe
Process development and control of laser drilled and shaped holes in turbine components
J. Lasermicro/Nanoeng.
2, 123-127, 2007
D. Petring, C. Fuhrmann, N. Wolf, R. Poprawe
Progress in Laser-MAG hybrid welding of high-strength steels up to 30 mm thickness
Proc. of 26th Int. Congress on Applications of Lasers & Electro-Optics ICALEO, October 29 - November 1, 2007, Orlando, Fl.
300-307, 2007
J. Wilkes, K. Wissenbach
Rapid Manufacturing of ceramic components by selective laser melting
Proc. 4. Int. WLT-Conf. on Lasers in Manufacturing, Munich, Germany, June 2007
207-211, 2007
D. Buchbinder, W. Meiners, K. Wissenbach, K. Müller-Lohmeier, E. Brandl
Rapid manufacturing von Aluminiumbauteilen für die Serienproduktion durch Selective Laser Melting (SLM)
Euro-uRapid2007, Frankfurt/M., December 3-4, 2007
6 S., 2007
D. Wortmann, M. Ramme, J. Gottmann
Refractive index modification using fs-laser double pulses
Opt. Expr.
15, 10149-10153, 2007
S. Höges, W. Meiners
Selective Laser Melting
Proc. 41. Jahrestagung Dt. Ges. f. Biomed. Technik im VDE, Aachen, Germany, September 2007
2 S., 2007
M. Traub, H.-D. Plum, H.-D. Hoffmann, T. Schwander
Spaceborne fiber coupled diode laser pump modules for intersatellite communications
Proc. SPIE
6736, in print, 2007
R. Wagner, J. Gottmann
Sub-wavelength ripple formation on various materials induced by tightly focused femtosecond laser radiation
8th International Conference on Laser Ablation
J. Phys.: Conference Series
59, 333-337, 2007
D. Wortmann, L. Moiseev, I. Vasilief, D. Ganser,L. Starovoytova, J. Gottmann
Waveguide lasers of Er:ZBLAN and Nd:GGG by pulsed laser deposition and fs-laser microstructuring
Proc. 4th Int. WLT-Conf. on Lasers in Manufacturing 2007, Munich, June
821-826, 2007
C. Schnitzler, S. Hambuecker, O. Ruebenach, V. Sinhoff, G. Steckman, L. West, C. Wessling, D. Hoffmann
Wavelength stabilization of HPDL array: fast-axis collimation optic with integrated VHG
Proc. SPIE
6456, 1-7, 2007
W. Meiners, A. Weisheit
Werkstoff-Kompromisse passé?
Form + Werkzeug
5, 78-81, 2007
M. Haverkamp, G. Kochem, K. Boucke, E. Schulze, H. Roehle
1.1W Four-wavelength Raman pump using BH lasers
Optical Fiber Communication and the National Fiber Optic Engineers Conf., 2007. OFC/NFOEC 2007
1-3, 2007
|
|
|
