|
Wir über uns
|
Veranstaltungen
|
Aus- & Fortbildung
|
Mitgliederservice
|
Innovation Award
Laser Technology
|
Innovation Award
2010
|
Innovation Award
2008
|
Innovationspreise
2000 - 2006
|
Nachwuchs-
Förderpreis
|
Publikationen
|
|
|
|
|
|
| |
Fachartikel
2009
2008
2007
2006
2005
2004
2003
2002
2001
2009
M. Benk, K. Bergmann
Adaptive spatially resolving detector for the extreme ultraviolet with absolute measuring capability
Rev. Sci. Instr.
80, 331131-331136, 2009
T. Biermann, G. Backes, A. Gasser, A. Weisheit
Adapted powder feed nozzles for different laser cladding applications
The Laser User
Nr 57, 28-29, 2009
J. Miesner, A. Timmermann, J. Meinschien, B. Neumann, S. Wright, T. Tekin, H. Schröder, T. Westphalen, F. Frischkorn
Automated assembly of Fast Axis Collimation (FAC) lenses for diode laser bar modules
Proc. SPIE
7198, 71980G (10 S.), 2009
P. Jander, R. Noll
Automated detection of fingerprint traces of high explosives using ultraviolet Raman spectroscopy
Appl. Spectrosc.
63, Nr 5, 559-563, 2009
N. C. Stache, A. Stollenwerk, J. Gedicke, A. Olowinsky, A. Knepper, T. Aach
Automatic calibration of a scanner-based laser welding system
J. Laser Appl.
21, Nr 1, 10-15, 2009
C. Gehlen, J. Makowe, R. Noll
Automatisierte Verwechslungsprüfung von Edelstahlhalbzeugen in der Produktion
Stahl und Eisen
129, Nr 7, 70-72, 2009
W. Schulz, U. Eppelt
Basic concepts of laser drilling
In: The Theory of Laser Materials Processing: Heat and Mass Transfer in Modern Technology. Ed. J. M. Dowden
Dordrecht: Springer 2009
Springer Series in Materials Science, Vol.119
pp. 129-165
D. Petring
Calculable laser cutting
Proc.of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 -18, 2009 Ed. by A. Ostendorf [u.a.]
Stuttgart: AT Fachverl. 2009
pp. 209-214
M. Banyay, L. Juschkin, P. Loosen, M. Roeckerath, J. Schubert
Characterization of ultra-thin layers in MOS-devices with XUV reflectometry
JARA FIT Jülich-Aachen Research Alliance for Fundamentals of Future Information Technology - Annual Report 2008
pp. 47-48, 2009
G. L. Georgiev, R. J. Baird, E. F. McCullen, G. Newaz, G. Auner, R. Patwa, H. Herfurth
Chemical bond formation during laser bonding of Teflon (R) FEP and titanium
Appl. Surf. Sci.
255, Nr 15, 7078-7083, 2009
C. D. Gehlen, E. Wiens, R. Noll, G. Wilsch, K. Reichling
Chlorine detection in cement with laser-induced breakdown spectroscopy in the infrared and ultraviolet spectral range
Spectrochim. Acta. Part B: Atomic Spectroscopy
64, 1135-1140, 2009
J. Diettrich, J. Stollenwerk, M. Kogel-Hollacher, M. Traub, C. Schnitzler
Coaxial laser brazing head
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -
18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
5 S.
D. Trusheim, M. Schulz-Ruhtenberg, J. L. Hernandez, A. Uruena, S. Krantz, C. Morilla, T. Sarnet, A. Olowinsky
Damage-less laser ablation of thin films for silicon solar cells
Proc. of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15-18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT Fachverl. 2009
5 S.
M. Dahmen, A. Drenker, M. Ungers, S. Pfeiffer, S. Kaierle
Detection of phase boundaries and defect detection in CO2-laser beam welding
Proc. of LAMP 2009 - the 5th Congress on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
5 S.
J. Jahnke, D. M. Mahlmann
Differences in the cellular dry weight per unit biovolume of Phormidium autumnale (Cyanobacteria) dependent on growth conditions
J. Appl. Phycol.
DOI 10.1007/s10811-0
7 S., 2009
M. Schulz-Ruhtenberg, J. L. Hernandez, V. Prajapati, R. Bleidiessel, C. Morilla, Y. Larmanda, V. Vervisch, T. Sarnet, A. Olowinsky
Direct laser doping for high-efficiency solar cells
ICALEO 2009, 28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando, Fl.
4 S.
M. Strotkamp, T. Schwarz, B. Jungbluth
Efficient, green laser based on a blue-diode pumped rare earth doped fluoride crystal in an extreme short resonator
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
1 S., 2009
J. Dietrich, M. Brajdic, S. Engbers, L. Klinkmüller, I. Kelbassa
Enhancing the quality and productivity of laser drilling by changing process gas parameters while processing
ICALEO 2009, 28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando, Fl.
4 S. (Paper 1705)
L. Juschkin, R. Freiberger, K. Bergmann
EUV microscopy for defect inspection by dark-field mapping and zone plate zooming
J. Phys.: Conf. Ser.
186, 012030 (3 S.), 2009
O. Fitzau, J. Geiger, H.-D. Hoffmann
Experimental and theoretical studies on kW class polarized fiber lasers for cw operation
Proc. SPIE
7195, 719509 (9 S.), 2009
J. Schüttler, J. Lose, R. Schmitt, W. Schulz
Exploring processing domain boundaries of complex production processes using a metamodeling approach
12th CIRP Conf. on Modelling of Machining Operations, May 7-8, 2009, San Sebastian (Spain). Ed.: P.J. Arrazola. Vol. 2
Paris: CIRP 2009
pp. 835-841
J. Gottmann, D. Wortmann, M. Hörstmann-Jungemann
Fabrication of sub-wavelength surface ripples and in-volume nanostructures by fs-laser induced selective etching
Appl. Surf. Sci.
255, 5641-5646, 2009
M. Duering, V. Kolev, B. Luther-Davies
Generation of tuneable 589nm radiation as a Na guide star source using an optical parametric amplifier
Opt. Expr.
17, 437-446, 2009
A. Weisheit, K. Wissenbach
Graded layers for wear and corrosion protection produced by laser cladding
In: Friction, Wear and Wear Protection. (Eds.) A. Fischer, K. Bobzin
Weinheim: Wiley-VCH 2009
6 S.
D. Gu, Y. Shen, G. Meng
Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti-Al-C composite powder
Materials Lett.
63, 2536-2538, 2009
A. S. Khanna, S. Kumari, S. Kanungo, A. Gasser
Hard coatings based on thermal spray and laser cladding
Int. J. Refract. Met. Hard Mat.
27, Nr 2, 485-49, 2009
R. Wester, R. Noll
Heuristic modeling of spectral plasma emission for laser-induced breakdown spectroscopy
J. Appl. Phys.
106, 123302 (10 S.), 2009
M. Traub, M. Giesberts, J. Geiger, C. Johnigk, H.-D. Hoffmann
High peak power fiber coupled super-pulsed diode lasers
Proc. SPIE
7198, 71980W (10 S.), 2009
G. Kochem, M. Traub, S. Hengesbach, D. Hoffmann
High power fiber coupled modules based on tapered diode-lasers at 975 nm
Proc. SPIE
7198, 71980R (10 S.), 2009
H. Schleifenbaum, W. Meiners, K. Wissenbach, C. Hinke
High Power Selective Laser Melting: A new approach for individualized series production
ICALEO 2009, 28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando; Fl.
10 S.
M. Benk, D. Schäfer, T. Wilhein, K. Bergmann
High power soft x-ray source based on a discharge plasma
J. Phys.: Conf. Ser.
186, 012024 (3 S.), 2009
B. Gronloh, M. Höfer, R. Wester, H.-D. Hoffmann
High power UV generation at 355 nm by means of extracavity frequency conversion of a high repetition rate Innoslab MOPA system
Proc. SPIE
7193, 71930Y (11S.), 2009
J. Gottmann, M. Hörstmann-Jungemann, M. Hermans, D. Beckmann
High speed and high precision Fs-laser writing using a scanner with large numerical aperture
J. Laser Micro/Nanoeng.
4, Nr 3, 192-196, 2009
N. Michel, M. Calligaro, Y. Robert, M. Lecomte, O. Parillaud, M. Krakowski, T. Westphalen, M. Traub
High wall-plug efficiency diode lasers with an Al-free active region at 975 nm
Proc. SPIE
7198, 71981H (8 S.), 2009
T. Mans, P. Rußbüldt
Höchste mittlere Leistung für Ultrakurzpulslaser
Laser + Photonik
Nr 3, 20-24, 2009
D. Petring, F. Schneider, N. Wolf, V. Nazery Goneghany
How beam quality, power and wavelength influence laser cutting and welding processes
Proc. of LAMP 2009, 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
8 S.
T. Biermann, A. Goettmann, J. Zettler, M. Bambach, A. Weisheit, G. Hirt, R. Poprawe
Hybrid laser assisted incremental sheet forming - improving formability of Ti- and Mg-based alloys
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -
18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 273-278
J. K. Kristensen, S. Webster, D. Petring
Hybrid laser welding of thick section steels - the HYBLAS Project
NOLAMP 12. 12th Nordic Conference in Laser Processing of Materials, 24th - 26th August 2009 Copenhagen
Lyngby, Denmark : ATV-SEMAPP/The Technical University of Denmark, 2009
18 S.
D. Gu, Z. Wang, Y. Shen, Q. Li, Y. Li
In-situ TiC particle reinforced Ti-Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior
Appl. Surf. Sci.
255, 9230-9240, 2009
D. Esser, D. Wortmann, J. Gottmann
In-volume waveguides by fs-laser direct writing in rare-earth-doped fluoride glass and phosphate glass
Proc. SPIE
7205, 7205101-7205109, 2009
H. Schleifenbaum, W. Meiners, K. Wissenbach
Individualisierte Produktion mittels High Power Selective Laser Melting (SLM)
WT-Online
99, Nr 6, 376-383, 2009
H. Schleifenbaum, W. Meiners, K. Wissenbach
Individualized production by means of High Power Selective Laser Melting
42nd CIRP Conference on Manufacturing Systems - Sustainable development of Manufacturing Systems, Grenoble, France, June 3-5, 2009
Paris: CIRP 2009
8 S.
D. Esser, D. Mahlmann, D. Wortmann, J. Gottmann
Interference microscopy of femtosecond laser written waveguides in phosphate glass
Appl. Phys. B: Lasers and Optics
96, Nr 2-3, 5 S. 2009
M. Leers, T. Westphalen, R. Pathak, C. Scholz
Investigation of n-side cooling in regards to bar geometry and packaging style of diode laser
Proc. SPIE
7198, 71980H, (9 S.), 2009
F. Schmitt, B. Mehlmann, J. Gedicke, A. Olowinsky, A. Gillner, R. Poprawe
Laser beam micro welding with high brilliant fiber lasers
Proc. of LAMP 2009, 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
6 S.
G. L. Georgiev, T. Sultana, R. J. Baird, G. Auner, G. Newaz, R. Patwa, H. Herfurth
Laser bonding and characterization of Kapton(A (R)) FN/Ti and Teflon(A (R)) FEP/Ti systems
J. Mat. Sci
44, 882-888, 2009
F. Schmitt, M. Schulz-Ruthenberg, A. Olowinsky, A. Gillner
Laser joining process for photovoltaic module production
Proc. of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 - 18 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 625-630
A. Richmann, E. Willenborg, K. Wissenbach
Laser polishing of fused silica
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -
18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 691-702
R. Ostholt, E. Willenborg, K. Wissenbach
Laser polishing of metallic freeform surfaces
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 397-401
F. Sari, D. Flock, A. Gillner, R. Poprawe, E. Haberstroh
Laserdurchstrahlfügen für Mikrosysteme und Halbleitertechnik
4. Kolloquium Mikroproduktion. Hrsg. F. Vollertsen, S. Büttgenbach
Bremen: BIAS Verl. 2009
12 S.
R. Noll, V. Sturm, J. Makowe
Laseremissionsspektrometrie analysiert zeitnah Stahlproben
Stahl und Eisen
129, 61-65, 2009
J. Powell, D. Petring, R.V. Kumar, S.O. Al-Mashikhi, A.F.H. Kaplan, K. T. Voisey
Laser-oxygen cutting of mild steel: the thermodynamics of the oxidation reaction
J. Phys. D: Appl. Phys.
42, 015504 (11 S.), 2009
M. Banyay, S. Brose, L. Juschkin
Line image sensors for spectroscopic applications in the extreme ultraviolet
Meas. Sci. Technol. 20, 105201 (5 S.), 2009
S. Hoeges, M. Lindner, H. Fischer, W. Meiners, W. Wissenbach
Manufacturing of bone substitute implants using Selective Laser Melting
In: ECIFMBE 2008, IFMBE Proc. 22.
(Eds.) J. Vander Sloten [u.a.]
Berlin, Heidelberg: Springer 2009
pp. 2230-2234
I. Mingareev, A. Horn
Melt dynamics of aluminium irradiated with ultrafast laser radiation at large intensities
J. Appl. Phys.
106, 13513 (7 S.), 2009
H. Schmidt, A. C. Rota, Ph. Imgrund, M. Leers
Micro metal injection moulding for thermal management applications using ultrafine powders
Powder Injection Moulding Int.
3, Nr 2, 55-59, 2009
D. Gu, Y. Shen
Microstructures and properties of high Cr content coatings on inner surfaces of carbon steel tubular components prepared by a novel mechanical alloying method
Appl. Surf. Sci.
256, 223-230, 2009
D. Wortmann, I. Mingareev, A. Brand, A. Horn
Micro-welding of glass by fs-laser irradiation and process observation using fs-pump-probe white light interference microscopy
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
CM2.2 THU, 1 S.
D. Wortmann, T. Mans, J. Weitenberg
Multi-100 W average power fs-laser for material processing applications
ICALEO 2009, 28th Int. Congr. on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando, Fl.
paper M101, pp. 856-860, 2009
S. Ocylok, A. Weisheit
Multi-graded layers by laser cladding for wear and corrosion protection of die-casting moulds
Proc. of the 5th WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 2009.
Ed. by A. Ostendorf [u.a.]
Stuttgart: AT Fachverl. 2009
4 S.
M. Giesberts, J. Geiger, M. Traub, H.-D. Hoffmann
Novel design of a gain-switched diode-pumped fiber laser
Proc. SPIE
7195, 71952P (9 S.), 2009
D. Petring, F. Schneider
One machine does it all for laser beam welding and cutting
Welding J.
March, 38-41, 2009
D. Donst, P. Abels, M. Ungers, F. Klocke, S. Kaierle
On-line quality control system for laser brazing
ICALEO 2009, 28th Int. Congr. on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando, Fl.
10 S., 2009
R. Noll, M. Krauhausen
Onlineprüfung von Rohren mit Lasertechnik
Stahlmarkt
H. 1, 40, 2009
I. Mingareev, D. Wortmann, A. Brand, A. Horn
Optical phase measurements during fs-processing of materials using time-resolved white-light interferometry
Conference on Lasers and Electro-Optics (CLEO), June 2-4, 2009
Piscataway, N.J.: IEEE 2009
2 S.
D. Schäfer, M. Benk, K. Bergmann, T. Nisius, U. Wiesemann, T. Wilhein
Optical setup for tabletop soft X-ray microscopy using electrical discharge sources
J. Phys.: Conf. Ser.
186, 063507 (3 S.), 2009
K. Bergmann, S.V. Danylyuk, L. Juschkin
Optimization of a gas discharge plasma source for extreme ultraviolet interference lithography at a wavelength of 11 nm
J. Appl. Phys.
106, 073309 (5 S.), 2009
T. Westphalen, M. Leers, M. Werner, M. Traub, H.-D. Hoffmann, R. Ostendorf
Packaging influence on laser bars of different dimensions
Proc. SPIE
7198, 71980K (8 S.), 2009
C. Fricke-Begemann
Partikel-Zusammensetzung mit Laserspektroskopie messen
Laborpraxis
Nr 12, 48-50, 2009
B. Jungbluth, D. Oberbeckmann, J. Wueppen
Power-scaling and prototyping of a gain switched Ti:Sapphire laser with a tuning range of 400 nm
Proc. SPIE
7193, 71930 (8 S.), 2009
D. Gu, Y. Shen, Z. Lu
Preparation of TiN-Ti5Si3 in-situ composites by Selective Laser Melting
Materials Lett.
63, 1577-1579, 2009
D. Buchbinder, W. Meiners, K. Wissenbach, K. Müller-Lohmeier, E. Brandl, N. Skrynecki
Rapid manufacturing of aluminium parts for serial production via Selective Laser Melting (SLM)
4. International Conference on Rapid Manufacturing, 8th & 9th July 2009
Loughborough: University 2009
12 S.
D. Buchbinder, W. Meiners
Rapid Manufacturing von Aluminiumbauteilen
Ingenieur Forum
1, 22-25, 2009
C. Brecher, N. Pyschny, P. Loosen, M. Funck, V. Morasch, R. Schmitt, A. Pavim
Self-optimising flexible assembly systems
In: Self-x in Engineering. B. Klöpper, W. Dangelmaier (Eds.)
Münster: Monsenstein und Vannerdat 2009
pp. 23-38
ISBN 978-3-86582-938-2
W. Schulz, M. Nießen, U. Eppelt, K. Kowalick
Simulation of laser cutting
In: The Theory of Laser Materials Processing: Heat and Mass Transfer in Modern Technology. Ed. J. M. Dowden
Dordrecht: Springer 2009
Springer Series in Materials Science, Vol.119
pp. 21-69
J. Löhring, A. Meissner, V. Morasch, P. Becker, W. Heddrich, D. Hoffmann
Single-frequency Nd:YGG laser at 935 nm for future water-vapour DIAL systems
Proc. SPIE
7193, 71931Y (7 S.), 2009
J. Dolkemeyer, M. Funck, V. Morasch, C. Schnitzler, P. Loosen
Soldering techniques for the assembly of high power solid-state lasers
European Conference on Lasers and Electro-Optics and the XIth European Quantum Electronics Conference, Munich June 14-19, 2009
1 S.
M. C. Funck, P. Loosen
Statistical simulation of selectively assembled optical systems
Proc. SPIE
7427, 7427B (10 S.), 2009
A. Temmler, E. Willenborg, N. Pirch, K. Wissenbach
Structuring by remelting
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -
18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 403-407
T. Sultana, G. L. Georgiev, R. J. Baird, G. W. Auner, G. Newaz, R. Patwa, H. J. Herfurth
Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications
J. Mech. Behav. Biomed. Mat.
2, 237-242, 2009
H. Maurer, G. Vossen
Sufficient conditions and sensitivity analysis for optimal bang-bang control problems with state constraints
In: System Modeling and Optimization. Ed.: A. Korytowski u.a. 23rd IFIP TC 7 Conference, Cracow, Poland, July 23-27, 2007
Berlin [u.a]: Springer 2009
IFIP Advances in Information and Communication Technology, Vol. 312.
ISBN 978-3-642-04801-2
pp. 82-99
G. Vossen
Switching time optimization for bang-bang and singular controls
J. Optim. Theory Appl.
Online first
1-18 (2009)
R. Poprawe, F. Schmitt, J. Gedicke, B. Mehlmann, A. Olowinsky, A. Gillner
Systemtechnik zur örtlichen Leistungsmodulation beim Laserstrahl-Mikroschweißen
4. Kolloquium Mikroproduktion. Hrsg.: F. Vollertsen, [u.a.]
Bremen: BIAS Verl. 2009
10 S.
M. Banyay, L. Juschkin
Table-top reflectometer in the extreme ultraviolet for surface sensitive analysis
Appl. Phys. Lett.
94, (6), 063507 (3 S.), 2009
M. Dahmen, S. Kaierle
The ecological footprint of laser beam welding
Proc. of LAMP 2009 - the 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
1-4 (2009)
D. Petring, F. Schneider, N. Wolf, V. Nazery Goneghany
The influence of beam quality, power and wavelength on laser cutting and welding
The Laser User
56, Autumn, 20-23, 2009
J. Dietrich, M. Brajdic, A. Mirau, L. Klinkmueller, I. Kelbassa
The influence of process gases on laser drilling
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15 -18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 815-818
H. Schleifenbaum, J.-Y .Uam, G. Schuh, C. Hinke
Turbulence in production systems - fluid dynamics and its contributions to production theory
Proc. of the World Congress on Engineering and Computer Science 2009. WCECS 2009, October 20-22, 2009, San Francisco/USA. Vol. 2
6 S.
L. Juschkin, R. Freiberger
Two magnification steps EUV microscopy with a Schwarzschild objective and an adapted zone plate lens
Proc. SPIE
7360, 736005 (8 S.), 2009
T. Mans, P. Rußbüldt, J. Weitenberg, G. Rotarius, D. Hoffmann, R. Poprawe
Ultrafast Ytterbium doped INNOSLAB amplifier with high average power
Conf. on Lasers and Electro-Optics/International Quantum Electronics Conference/, OSA Technical Digest (CD) Optical of America, 2009
paper CThJ2 (2 S.)
M. Mir, N. Gutknecht, R. Poprawe, L. Vanweersch, F. Lampert
Visualising the procedures in the influence of water on the ablation of dental hard tissue with erbium:yttrium-aluminium-
garnet and erbium, chromium:yttrium-scandium-gallium-garnet laser pulses
Lasers Med. Sci.
24, 365-374, 2009
D. Buchbinder, H. Schleifenbaum
Wirtschaftliche Alternative
Giesserei-Erfahrungsaustausch
53, 18-20, 2009
M. Banyay, L. Juschkin, T. Bücker, P. Loosen [u.a.]
XUV metrology: Surface analysis with Extreme Ultraviolet Radiation
Proc. SPIE
7361, 736113 (12 S.), 2009
S. Danylyuk, L. Juschkin, S. Brose, K. Bergmann, P. Loosen [u.a.]
XUV interference lithography for sub-10 nm patterning
JARA FIT Jülich-Aachen Research Alliance for Fundamentals of Future Information Technology - Annual Report 2008
pp. 49-50, 2009
T. Mans, P. Rußbüldt, Weitenberg, J.
Yb :KYW Innoslab-Amplifier
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
paper CA3_2 (1S.), 2009
M. Werner, C. Wessling, S. Hengesbach, M. Traub, H.-D. Hoffmann
100 W/100 µm passively cooled, fiber coupled diode laser at 976 nm based on multiple 100 µm single emitters
Proc. SPIE
7198, 71980P (7 S.), 2009
F. Schneider, D. Petring, V. Nazery, C. Nuesser
2D and 3D laser cutting and welding with the combi-head: Efficient production by flexible process changes
Proc. 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 - 18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 245-249
D. Petring [u.a.]
3D-Laserschneiden und -schweißen in einer Maschine
MM MaschinenMarkt
Nr 23, 20-23, 2009
P. Russbueldt, T. Mans, G. Rotarius, J. Weitenberg, H.D. Hoffmann, R. Poprawe
400 W Yb:YAG Innoslab fs-amplifier
Opt. Expr.
17, Nr 15, 12230-12245, 2009
|
|
|
